| LITLHAKISO TSA MALLEABLE PEPI EA TŠEPE |
| Lintho tse bonahalang | Pelo e ntsho e tshepe e bonolo |
| DIN Standard | Likhoele: ISO 7/1 |
| Boima: ISO 49, DIN2950, EN10242 |
| Thepa ea lik'hemik'hale | (C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S% <0.2%). |
| Thepa ea nama | Matla a tsitsitseng >>=350mpa, Elongation >=10%, Ho thatafala <=150HB |
| Khatello ea teko | 2.5MPa |
| Khatello ea ho sebetsa | 1.6MPa |
| Mofuta | 1. Ho roaloa ka likhopo. |
| 2. Ho roaloa lifaha ntle le likhopo. |
| Boholo | 1/8″,3/8″,1/2″,3/4″,1″,11/4″,11/2″,2″,21/2″,3″,4″,5″, 6″. |
| Bokaholimo | Ø Sekontiri |
| Ø Botsho bo tlwaelehileng/Botsho bo kganyang |
| Letoto | E boima, e tloaelehileng, e mahareng, e bobebe |
| Mohlala | Litšiu, Lithapa, Lifapano, Likoba, Likopano, Lihlahla |
| Lateral Y Braches, Sockets, Nipples, Hexagon / Round |
| Li-caps, li-plug, Locknuts, Flanges, Tee ea Side Outlet |
| Side Outlet Elbows, joalo-joalo. |
| Lihlahisoa tse amanang | 1. Li-nipples tsa tšepe ea carbon le li-sockets | 2. Li-flanges |
| 3. Lisebelisoa tsa tšepe tsa carbon butt-welding | 4. Liphaephe |
| 5. Lisebelisoa tsa khatello e phahameng | 6. Li-valve |
| 7. PTFE .thread seal litheipi | 8. Lisebelisoa tsa koporo |
| 9. Lisebelisoa tsa phala ea tšepe ea ductile | 10. Lisebelisoa tsa koporo |
| 11. Lisebelisoa tsa Grooved | 12. Lisebelisoa tsa bohloeki, joalo-joalo. |
| Khokahano | Monna, Mosali |
| Sebopeho | Ho lekana, ho fokotsa |
| Setifikeiti | BSI, ANAB, ISO9001,FM |
| Lisebelisoa | E loketse lithapo tsa Pipe tse hokahanyang mouoane, moea, khase, oli joalo-joalo. |
| Litšoantšo kapa meralo ea moreki lia fumaneha. |
| Sephutheloana | 1. Mabokose a se nang liphalete. |
| 2. Mabokose a nang le liphalete. |
| 3. Mekotla e lohiloeng habeli |
| Kapa joalo ka litlhoko tsa moreki. |
| Lintlha tsa thomello |
| Ho ea ka bongata le litlhaloso tsa taelo ka 'ngoe. |
| Nako e tloaelehileng ea ho pepa e tloha matsatsing a 30 ho isa ho a 45 ka mor'a ho fumana depositi. |
